How To Reset Maintenance Light On Toyota Corolla 2014
With the ignition “off”, press and hold button below the speedometer. Reset maintenance light on 2014 toyota corolla.
It’s an easy fix to reset the maintenance light on your toyota corolla.
How to reset maintenance light on toyota corolla 2014. Here are the steps on how to reset 2013 toyota corolla maintenance light : Just follow these simple steps: Continue to hold the odometer buttonfor around 10.
It’s an easy fix to reset the maintenance light on your toyota corolla. Locate and press and hold the “trip reset” button on the odometer. Ensure trip metre a reading is shown.
Read below to learn how to turn off the maintenance light on the toyota corolla: This japanese automobile manufacturer is known for producing some of the most reliable vehicles in the world, but sometimes, even toyotas flash a maintenance required light on their dashboard. Toyota sells this vehicle in more than 150 countries at a rate of one corolla every 15 seconds!.
Do not crank the vehicle. Toyota recommends not to ignore the light and doing a series of inspections to prevent damages to the engine. Turn “power” switch to off.
Next you will need to find the trip button/stick on the instrument display and press it until trip a is displayed. To reset the oil light on the 2014 toyota corolla you will first need to park in a safe spot that is out of the way. Turn the key to on, but don’t start the engine.
Press the engine start stop switch once (do not start engine) or turn ignition key to run (one position before starting engine). Continue to hold down the trip odometer reset button. Before you decide to reset the maintenance required light in your toyota corolla, it’s important to understand why it came on.
This vehicle has a maintenance required light that goes on every 5,000 miles. To reset the check engine light on the 2014 corolla turn the engine on and make sure the odometer is displayed. The “maintenance required” notification will appear on the toyota corolla once the vehicle has travelled 4,500 miles since the last oil change.once maintenance service has been completed on the vehicle, use these steps to perform an oil reset.
After doing that you need to turn the vehicle to the off position. Hold the button until “trip a” appears on the screen. To reset the 2016 toyota corolla maintenance light after an oil change, please follow these instructions:
While pressing the button to reset the trip, turn the key back to the “on” position. With the “power” switch off, press and hold “odo trip” button. Press and hold the trip reset button, and turn the ignition switch to the.
Use the “up” and “down” buttons to select “vehicle settings“. Turn to the “on” position. Switch the car off but keep the odometer button held down.
Even after your recommended maintenance appointment, you may find the maintenance light on your toyota corolla is still on. Reset maintenance light on 2014 toyota corolla. Maintenance light reset, 2014, toyota highlander, oil light reset,14, turn the ignition switch to the on position, but do not start the engine.
Hold down knob for at least 5 seconds. Depress the odometer button until your dash readout shows trip a. How to reset maintenance light on toyota corolla 2014.
With the odometer button held down, turn the key to the on position again. The first thing you will do is turn the car to the on position without starting it. Continue to hold button until”000000″ is displayed and “maint reqd” light turns off.
Turn the key to the “on” position, but don’t start the car. Hold the button down and turn the key to on position without starting the engine. Press and hold the trip reset button near the odometer until “trip a” appears on the central screen.
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Turn the key back to “off.”. I only need to service it over 10,000 miles as per toyota, so i have to reset this light every 5,000 miles on my own without going into the dealership.
Turn the engine off and press the tripmeter button. How to reset maintenance light toyota. You take the service of a toyota dealership for the oil change, they will reset maintenance light toyota for yourself.
We at toyota of north miami have a few tricks to turn that light off. Wait until the display of the odometer reads all 00000 before releasing the button. How to reset maint reqd light on toyota corolla.
Use your keys to turn the key to the “on” position in your toyota corolla, but don’t start the car. Insert the keys in the corolla. Unlike the “check engine” light, the toyota maintenance required light in the gauge cluster—which reads “maint reqd”—means that it has been 5,000 miles since the last reset.
Continue to hold button until “maint reqd” light turns off. Put your key in the ignition and turn it to position one (right before starting the car). Turn the key, so the car is off.
Continue holding the button until the miles section on the odometer flashes zero. Insert the keys in the corolla. Put the key in the ignition.
If you try this for yourself and the light remains on, visit our service center near homestead for a little more help. Did you know that the toyota corolla is the best selling automobile worldwide?